SVI0.S08 VALVE SERIES

SAE Cartridge - 250 bar

Directional Valve - 3/2 Seated Type

HYDRAULIC SYMBOL

Cross section

Cavity

SAE08-2

DESCRIPTION

A solenoid valve operated, 3 way 2 positions, seated type, direct acting, bi-directional blocking, screw-in hydraulic directional cartridge valve.

In the de-energized mode, the SVI0.S08 allows flow bi-directionally between ports 1 and 2, while blocking flow at 3. In the energized mode,

bi-directional flow is allowed between ports 3 and 2, while flow is blocked at 1 with extremely low leakage. Even if port 1 and 3 may be fully

pressurized they are not intended to be used as the inlet. The rigid design using a 1-piece body contributes to minimize the effect of

eccentricities in cavity and provides great reliability. Low pressure drop thanks to optimized flow path.

TECHNICAL DATA

0,25 cm

/ min @ 250 bar

EXTERNAL COMPONENT TREATMENT

Zn/Fe - standard (96h)

Zn/Ni (720h) (Upon customer request)

MAXIMUM FLOW

10 l/min

MAXIMUM OPERATING PRESSURE

250 bar

WEIGHT

0,231 kg

SEAL KIT CODE

SK.035 and SK.027 (coil) (standard sealing NBR-BUNA-N)

OIL TESTING CONDITIONS

ISO VG 46 cSt

TECH. SPEC. FOR CHARACTERIZATION

see page 689

ORIENTATION

No restrictions

INSTALLATION TORQUE

35-40 Nm

FILTRATION

20/18/15 ISO 4406 (maximum filtration admitted)

VISCOSITIES

7,4 to 420 cSt

FLUIDS

Mineral - based or synthetics with lubricating properties

OIL TEMPERATURE RANGE

-30° C to 110° C

O-RING TEMPERATURE RANGE

-30° C to 110° C (standard sealing NBR - BUNA - N)

-35° C to 140° C (HNBR - Upon customer request)

-23° C to 225° C (FKM - Upon customer request)

Hex.24

MAXIMUM INTERNAL LEAKAGE

85% of nominal

MINIMUM PULL-IN VOLTAGE

COIL

20,5 W (Upon customer request - for more details see page 595)

22 W (for more details see page 595)

S V I 0

ORDERING CODE

S 0 8 0

. .

0 0

Valve basic code

Size

Marking

0 = Standard factory marking.

Customized marking can be done

upon request.

MANUAL OVERRIDE

3/4-16 UNF with Ø15,87 and

Ø14,27 nose sizes

Model code Type of override

0 No override

3 Push pin

4 Push knob

8 Screw

Note

Costumized nut can

be selected

SOLENOID Valves

Specifications may change without notice.

1 2